icon_03
简体中文
icon_07
English
Electromagnetic compatibility solution
Keep your feet on the ground and look up at the stars. Make the test smoother and more convenient!
Service Hotline: 0755-86537571
Product 
Civil standard EMC electronics mainly include: consumer electronics, multimedia electronic products and engineering and medical electronic products. According to the corresponding EMC standards and test distance, anechoic chambers can be divided into 3-meter method, 5-meter method, and 10-meter method anechoic chambers.
The voltage sag generator is used to evaluate the performance of electrical and electronic equipment under voltage sags, short interruptions and voltage changes, and the products fully meet the requirements of the latest standards such as IEC61000-4-11 and GB/T17626.11.
Power frequency magnetic field generators are used to evaluate the performance of household, commercial and industrial electrical and electronic equipment in power frequency (continuous or short-term) magnetic fields. The products fully meet the requirements of the latest standards such as IEC61000-4-8 and GB/T17626.8.
RF conduction immunity testing equipment, using integrated design, built-in signal generator, RF power amplifier and RF power meter. With special RF conduction immunity testing software, it can be calibrated and tested automatically, which greatly improves the expansibility and testing efficiency of the system, and supports users to view, save and print test results by themselves.
According to standards: EN50147, GB/T12190 and related standards. Customized dimensions, filter specifications, access interface boards and so on can be made according to the actual needs of customers.
It can be used in vehicle electronic anechoic chamber and military standard electronic anechoic chamber. According to the requirements of ANSI C 63.4, CISPR25, CISPR16-2-3, CISPR16-1-4, EN 50147-2 and related standards. According to the standard: GJB151B, American standard MIL-STD-461F and related standard requirements.
Civil standard EMC electronics mainly include: consumer electronics, multimedia electronic products and engineering and medical electronic products. According to the corresponding EMC standards and test distance, anechoic chambers can be divided into 3-meter method, 5-meter method, and 10-meter method anechoic chambers.
Meet the standards: IEC61000-4-5, IEC61000-4-4, GB/T 17626.5 and GB/T 17626.4. Meet the EUT specifications as follows: AC:Umax 700V current: 16A, 32A, 60A, 100A DC:Umax 1000V current: 16A, 32A, 60A, 100A
The influence of electrostatic discharge on electrical and electronic equipment, devices or systems is everywhere, and it is a kind of electromagnetic energy with high degree of harm. Only by improving the level of antistatic ability of electronic products can the safe use of electronics be ensured. Meet the criteria: IEC61000-4-2, GB/T 17626.2,
The voltage sag generator is used to evaluate the performance of electrical and electronic equipment under voltage sags, short interruptions and voltage changes, and the products fully meet the requirements of the latest standards such as IEC61000-4-11 and GB/T17626.11.
Power frequency magnetic field generators are used to evaluate the performance of household, commercial and industrial electrical and electronic equipment in power frequency (continuous or short-term) magnetic fields. The products fully meet the requirements of the latest standards such as IEC61000-4-8 and GB/T17626.8.
RF conduction immunity testing equipment, using integrated design, built-in signal generator, RF power amplifier and RF power meter. With special RF conduction immunity testing software, it can be calibrated and tested automatically, which greatly improves the expansibility and testing efficiency of the system, and supports users to view, save and print test results by themselves.
<
>
shielded room
According to standards: EN50147, GB/T12190 and related standards. Customized dimensions, filter specifications, access interface boards and so on can be made according to the actual needs of customers.
1m darkroom
It can be used in vehicle electronic anechoic chamber and military standard electronic anechoic chamber. According to the requirements of ANSI C 63.4, CISPR25, CISPR16-2-3, CISPR16-1-4, EN 50147-2 and related standards. According to the standard: GJB151B, American standard MIL-STD-461F and related standard requirements.
Anechoic room of civil standard
Civil standard EMC electronics mainly include: consumer electronics, multimedia electronic products and engineering and medical electronic products. According to the corresponding EMC standards and test distance, anechoic chambers can be divided into 3-meter method, 5-meter method, and 10-meter method anechoic chambers.
Surge pulse group
Meet the standards: IEC61000-4-5, IEC61000-4-4, GB/T 17626.5 and GB/T 17626.4. Meet the EUT specifications as follows: AC:Umax 700V current: 16A, 32A, 60A, 100A DC:Umax 1000V current: 16A, 32A, 60A, 100A
Electrostatic gun
The influence of electrostatic discharge on electrical and electronic equipment, devices or systems is everywhere, and it is a kind of electromagnetic energy with high degree of harm. Only by improving the level of antistatic ability of electronic products can the safe use of electronics be ensured. Meet the criteria: IEC61000-4-2, GB/T 17626.2,
Voltage sag
The voltage sag generator is used to evaluate the performance of electrical and electronic equipment under voltage sags, short interruptions and voltage changes, and the products fully meet the requirements of the latest standards such as IEC61000-4-11 and GB/T17626.11.
Power frequency magnetic field generator
Power frequency magnetic field generators are used to evaluate the performance of household, commercial and industrial electrical and electronic equipment in power frequency (continuous or short-term) magnetic fields. The products fully meet the requirements of the latest standards such as IEC61000-4-8 and GB/T17626.8.
Radio frequency conduction immunity testing equipment
RF conduction immunity testing equipment, using integrated design, built-in signal generator, RF power amplifier and RF power meter. With special RF conduction immunity testing software, it can be calibrated and tested automatically, which greatly improves the expansibility and testing efficiency of the system, and supports users to view, save and print test results by themselves.
shielded room
According to standards: EN50147, GB/T12190 and related standards. Customized dimensions, filter specifications, access interface boards and so on can be made according to the actual needs of customers.
1m darkroom
It can be used in vehicle electronic anechoic chamber and military standard electronic anechoic chamber. According to the requirements of ANSI C 63.4, CISPR25, CISPR16-2-3, CISPR16-1-4, EN 50147-2 and related standards. According to the standard: GJB151B, American standard MIL-STD-461F and related standard requirements.
Anechoic room of civil standard
Civil standard EMC electronics mainly include: consumer electronics, multimedia electronic products and engineering and medical electronic products. According to the corresponding EMC standards and test distance, anechoic chambers can be divided into 3-meter method, 5-meter method, and 10-meter method anechoic chambers.
Surge pulse group
Meet the standards: IEC61000-4-5, IEC61000-4-4, GB/T 17626.5 and GB/T 17626.4. Meet the EUT specifications as follows: AC:Umax 700V current: 16A, 32A, 60A, 100A DC:Umax 1000V current: 16A, 32A, 60A, 100A
Electrostatic gun
The influence of electrostatic discharge on electrical and electronic equipment, devices or systems is everywhere, and it is a kind of electromagnetic energy with high degree of harm. Only by improving the level of antistatic ability of electronic products can the safe use of electronics be ensured. Meet the criteria: IEC61000-4-2, GB/T 17626.2,
Voltage sag
The voltage sag generator is used to evaluate the performance of electrical and electronic equipment under voltage sags, short interruptions and voltage changes, and the products fully meet the requirements of the latest standards such as IEC61000-4-11 and GB/T17626.11.
Power frequency magnetic field generator
Power frequency magnetic field generators are used to evaluate the performance of household, commercial and industrial electrical and electronic equipment in power frequency (continuous or short-term) magnetic fields. The products fully meet the requirements of the latest standards such as IEC61000-4-8 and GB/T17626.8.
Radio frequency conduction immunity testing equipment
RF conduction immunity testing equipment, using integrated design, built-in signal generator, RF power amplifier and RF power meter. With special RF conduction immunity testing software, it can be calibrated and tested automatically, which greatly improves the expansibility and testing efficiency of the system, and supports users to view, save and print test results by themselves.
Technical service
The maintenance of the turntable can make the turntable rotate more smoothly and prolong the service life of the turntable.
Assist customers to apply for CNAS, second-level confidentiality and military laboratory qualification.
Maintenance of 5m turntable, including: replacement of Reed, metal plate
Turntable maintenance, cleaning up rust and dust inside the turntable
The maintenance of the turntable can make the turntable rotate more smoothly and prolong the service life of the turntable.
Darkroom maintenance, slide the gate lifting platform, re-adjust the lifting valve.
Darkroom maintenance, replace 2m turntable.
Assist customers to apply for CNAS, second-level confidentiality and military laboratory qualification.
<
>
Turntable maintenance
Maintenance of 5m turntable, including: replacement of Reed, metal plate
Turntable cleaning
Turntable maintenance, cleaning up rust and dust inside the turntable
Turntable lubrication
The maintenance of the turntable can make the turntable rotate more smoothly and prolong the service life of the turntable.
Maintenance of sliding gate lifting platform
Darkroom maintenance, slide the gate lifting platform, re-adjust the lifting valve.
Replacement of 2m turntable
Darkroom maintenance, replace 2m turntable.
Laboratory qualification
Assist customers to apply for CNAS, second-level confidentiality and military laboratory qualification.
Turntable maintenance
Maintenance of 5m turntable, including: replacement of Reed, metal plate
Turntable cleaning
Turntable maintenance, cleaning up rust and dust inside the turntable
Turntable lubrication
The maintenance of the turntable can make the turntable rotate more smoothly and prolong the service life of the turntable.
Maintenance of sliding gate lifting platform
Darkroom maintenance, slide the gate lifting platform, re-adjust the lifting valve.
Replacement of 2m turntable
Darkroom maintenance, replace 2m turntable.
Laboratory qualification
Assist customers to apply for CNAS, second-level confidentiality and military laboratory qualification.
About us
Continuously focus on the innovation and industrialization of electromagnetic reliability technology to provide customers with efficient, optimized and beautiful electromagnetic compatibility testing solutions.
News and information
More 
Picture-leaflet
Contact us
Tel: 0755-86537571 
 Email: taogai@fuhang-system.com Address: 1302, Jiangshi Building, Fuhai Street, Bao 'an District, Shenzhen
Fast navigation
Fuhang Technology Co., Ltd.
Shenzhen Fuhang Technology Co., Ltd.(referred to as Fuhang Technology) is a professional provider of overall solutions for electromagnetic compatibility testing. The company's headquarters is located in Shenzhen, with offices and factories in Xi'an and Jiangsu respectively.

2025年4月24日 星期四 8时59分45秒

Copyright © Shenzhen Fuhang Technology Co., Ltd. All rights reserved.
粤ICP备2024333980号
粤公网安备44030002005678号粤公网安备44030002005678号
Monday to Friday 8:00-20:00
Official account of Wechat
Official account of Wechat